Engineering books
Engineering books
(OP)
Forgive me for my elementary question, I get tired of being on the computer, as I rather read from a book.
On that note, Does anyone have some recomendations on some very good engineering books? I really would like to find a book that has a lot of information about thread strengths. Like screwing a cylinder in an end cap. I would like to know strengths of pullout forces. An example problem I would like answered would be, What major thread diameter and what threads per inch would be required for a given force? These are basic questions that have always haunted me..
Thanks,
brent
On that note, Does anyone have some recomendations on some very good engineering books? I really would like to find a book that has a lot of information about thread strengths. Like screwing a cylinder in an end cap. I would like to know strengths of pullout forces. An example problem I would like answered would be, What major thread diameter and what threads per inch would be required for a given force? These are basic questions that have always haunted me..
Thanks,
brent





RE: Engineering books
Mechanical Engineering Design by Shigley and Mischke, from McGraw-Hill
Handbook of Bolts and Bolted Joints by Bickford and Nassar, from Dekker
VDI 2230 Systematic Calculation of high-duty bolted joints from Verein Deutscher Engenieure
Regards,
Cory
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
RE: Engineering books
RE: Engineering books
RE: Engineering books
Everything else is just implementation and details
!
Cheers
Greg Locock
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.
RE: Engineering books
Machinary's Handbook.
Its got lot of important engineering information.