Autosave
Autosave
(OP)
I'm not sure where to look to do this. I have a drawing that is getting quite large, and it seems that about every minute it starts to autosave. It takes a while and slows everything down. I would like to change the time to every 15 minutes or so, but cannot find anything under system or document options that allows this. Eventually I will get more ram so maybe the problem will go away.
Thanks
Thanks






RE: Autosave
Helpful SW websites every user should be aware of. FAQ559-520
Making the best use of this Forum. FAQ559-716
How to get answers to your SW questions. Thread559-116096
RE: Autosave
For example:
Edit sketch
Make 15 changes to sketch
Exit sketch
That's ONE change (as far as autosave is concerned)
RE: Autosave
RE: Autosave
Jeff Mowry
www.industrialdesignhaus.com
Reality is no respecter of good intentions.
RE: Autosave
Also, the backup folder can very quickly grow to a huge size if you do not frequently clean it out.
Helpful SW websites every user should be aware of. FAQ559-520
Making the best use of this Forum. FAQ559-716
How to get answers to your SW questions. Thread559-116096
RE: Autosave
RE: Autosave
Chris
Sr. Mechanical Designer, CAD
SolidWorks 05 SP0.1 / PDMWorks 05
ctopher's home site
RE: Autosave
Jeff Mowry
www.industrialdesignhaus.com
Reality is no respecter of good intentions.
RE: Autosave
RE: Autosave