MCC Cabling
MCC Cabling
(OP)
Can anyone point to the NEC Code where it is illegal to do the following or is it simply legal to do this:
My MCC has a 400A Fused diconnect switch. I leave that switch through my ABB wireway, through the top and supply power to a wall mounted VFD. The output cabling comes back to my MCC and reuses the wireway to exit out the bottom of the MCC.
Isn't the reentry of the power cable back into the MCC a code violation?
My MCC has a 400A Fused diconnect switch. I leave that switch through my ABB wireway, through the top and supply power to a wall mounted VFD. The output cabling comes back to my MCC and reuses the wireway to exit out the bottom of the MCC.
Isn't the reentry of the power cable back into the MCC a code violation?





RE: MCC Cabling
"Venditori de oleum-vipera non vigere excordis populi"
RE: MCC Cabling
RE: MCC Cabling
"Venditori de oleum-vipera non vigere excordis populi"
RE: MCC Cabling
RE: MCC Cabling
But remember, what you may regard as an error was probably the solution to another problem!
"Venditori de oleum-vipera non vigere excordis populi"