Title Block attribu
Title Block attribu
(OP)
Hi,
I would like to know how i can automate Title Block
Exemple:
I whant to use filename = Part001.prt and copy this value in my title block in my Drawing number section = Part001
I would also like to copy the value of scale of Sheet1 to my Title block Scale section.
I whant to copy the current date and replace date of REV
Etc.
Thank for help
I would like to know how i can automate Title Block
Exemple:
I whant to use filename = Part001.prt and copy this value in my title block in my Drawing number section = Part001
I would also like to copy the value of scale of Sheet1 to my Title block Scale section.
I whant to copy the current date and replace date of REV
Etc.
Thank for help





RE: Title Block attribu
It is written in GRIP, so you will need GRIP Execute and Develop licenses.
"Wildfires are dangerous, hard to control, and economically catastrophic."
"Fixed in the next release" should replace "Product First" as the PTC slogan.
Ben Loosli
CAD/CAM System Analyst
Ingersoll-Rand