×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Welding of SS 316Ti
2

Welding of SS 316Ti

Welding of SS 316Ti

(OP)
Please clarify if the filler wire to be used for welding of SS 316Ti material is Er318Si? The service is 620 degree C. Or there is another alternative. My colleague insist to use Er347.

RE: Welding of SS 316Ti

Filler material will depend on reason for selecting 316Ti as base material.

RE: Welding of SS 316Ti

(OP)
ijzer,
sorry, i did not get your point...

RE: Welding of SS 316Ti

The question is why is material 316Ti selected for your equipment / pipe or what ever. Pitting resistance ,heat resistance or just because it was an available stainless steel?

In case of doubt I would use matching filler which is ER318 since it is stabilised and contains Mo.

RE: Welding of SS 316Ti

You will need a filler with Mo and one that is stabilized.  If you use the 347 the welds will have less corrosion resistance.  If you use straight 316 the welds will not resist IG carbide formation.

= = = = = = = = = = = = = = = = = = = =
Corrosion never sleeps, but it can be managed.
http://www.trenttube.com/Trent/tech_form.htm

RE: Welding of SS 316Ti

(OP)
Other than less corrosion resistance,What will be the effect on the material 316Ti if this will be joined/welded by ER347? The service of the system is 620 degC temperature and 5 barg pressure.

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources