Print Macro
Print Macro
(OP)
Has anybody seen a print macro that will allow you to put in an assembly and it will automatically print all the individual parts that belong to the Top Level. I have searched the forum and even searched around on the internet, and was not able to find any reference to a macro that will attempt this.
Thanks,
Thanks,






RE: Print Macro
ht
I think the Assembly BOM macro is what you are looking for.
Hope this helps.
Best Regards,
Jon
Challenges are what makes life interesting; overcoming them is what makes life meaningful.
RE: Print Macro
I may have confused you with the earlier post. What I want to do is put in a top level assy and have each of the component drawings to be printed out that belong to the top level drawing. I have not seen a macro that will do this. The link you provided is great and has some other macros that may be handy. If you need further clarification let me know.
Thanks,
Don't worry about people stealing your ideas. If your ideas are any good, you'll have to ram them down people's throats.
--Howard Aiken, IBM engineer
RE: Print Macro
Regg
RE: Print Macro
Regards,
Scott Baugh, CSWP
3DVision Technologies
www.3dvisiontech.com
www.scottjbaugh.com
FAQ731-376
FAQ559-716 - SW Fora Users
RE: Print Macro