×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Anyone work with D2W202F SSR by Crydom?

Anyone work with D2W202F SSR by Crydom?

Anyone work with D2W202F SSR by Crydom?

(OP)
I bought three of these little neat devices for a hobby project but have yet to find any good pin configuration or schematics for these SSRs.  Is there any schematics out there with special or needed connections with the pins?  It seems fairly obvious how to connect these but I just want to make sure of any recommended connections before I start.  Any help will be greatly appreciated!

RE: Anyone work with D2W202F SSR by Crydom?

3+ and 4- are your dc inputs.  Just connect a 9 v battery to quickly test.  

With any of these devices, just watch the amperage vs temperature.  If your load is about 0.1-1 amp with low inrush, you are probably in good shape.

RE: Anyone work with D2W202F SSR by Crydom?

(OP)
Thanks for the info MIKE2468, but I guess what I meant to say was if there were any special connections or recommended connections to pins 1 and 2, 240VAC and 2A.  I currently have a working demo of LEDs but need to replace them with SSRs.  I am basically monitoring temperature through an LM34, amplifying that signal to get my voltage reference on a PIC device(18F452).  Software seems to be fine, hysteresis factor is okay, but do you happen to know if adding these SSRs would create any unwanted interference or loads?  Do I just connnect pin 1 to my AC load?  Its quite obvious I have not worked with SSRs before but any help would be appreciated.  Besides, its just a little hobby project of mine, so there is no rush.

RE: Anyone work with D2W202F SSR by Crydom?

Nothing really special here, just try it.  The part number that you picked is triac based so don't abuse the amperage rating.  Obviously, a small fuse on your load wiring side would be a good thing.  

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources