blower design
blower design
(OP)
i would like to design and manfacture a centrifugal blower to move about 10 m3/s
to use it in my research about wind turbines
any help please would be apreciated
thanks
m.hammam
to use it in my research about wind turbines
any help please would be apreciated
thanks
m.hammam





RE: blower design
RE: blower design
For your purposes, you need a rather uniform velocity across the flow. This will neccesitate a fully developed axial flow fan with a well faired inlet, properly designed blades, and a good set of straightening vanes. The straighteners are not needed for energy recovery, but for flow uniformity. An egg crate straightener may also be needed. There may be other complications I have not thought of.
RE: blower design
RE: blower design