points 2d
points 2d
(OP)
I have bee sent a fax (soon to have the data on a excel) the points are for a 2d curve, what’s the most effective way of generating a 2d curve from these points, To then revolve to get a model?
Thanks
Thanks
When was the last time you drove down the highway without seeing a commercial truck hauling goods?
Download nowINTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: points 2d
You will then have to browse to the .txt file and open it.
You should now see your curve generated on your screen. If you want to revolve that curve you may have to create a seperate sketch and convert the curve entities and then draw a centerline to revolve about.
Hope this helps!
Best Regards,
Jon
Challenges are what makes life interesting; overcoming them is what makes life meaningful.
RE: points 2d
Thanks again James