×
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS

Log In

Come Join Us!

Are you an
Engineering professional?
Join Eng-Tips Forums!
  • Talk With Other Members
  • Be Notified Of Responses
    To Your Posts
  • Keyword Search
  • One-Click Access To Your
    Favorite Forums
  • Automated Signatures
    On Your Posts
  • Best Of All, It's Free!
  • Students Click Here

*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.

Posting Guidelines

Promoting, selling, recruiting, coursework and thesis posting is forbidden.

Students Click Here

Jobs

Calculated Moments of Inertia

Calculated Moments of Inertia

Calculated Moments of Inertia

(OP)
I have CAD models and the software I used (Mechanical Desktop) is capable of calculating moments of inertia. However, three different versions are returned; (1)Mass Moments of Inertia (2)Mass Products of Inertia & (3)Principal Mass Moments. The coordinates for (1) are given in Lx, Ly & Lz, for (2) in XY, XZ, YZ, and for (3) I, J, K. I am used to seeing MOI expressed in Ix, Iy, Iz.

Does anyone know which if these would be the "correct" one for me?

RE: Calculated Moments of Inertia

It sounds like you are wanting the moment of inertia of a surface (like a beam cross section), and the software is giving you moments of inertia of a three-dimensional solid.  Is this right?  In that case, none of the moments given correspond to the values you're looking for.

RE: Calculated Moments of Inertia

(OP)
I have a 3D design of a housing and covers and require the MOI for each part. I hope this helps.

RE: Calculated Moments of Inertia

BILLTATI:  It depends on what you wnat to do.  I beleive you need to go back to the fndamentals to determine what you want to do.

Regards
Dave

RE: Calculated Moments of Inertia

(OP)
I want the moments of inertia for each part rotated about the X, Y & Z axis.

RE: Calculated Moments of Inertia

BILLTATI:  You then want the principle moment of inertia.  So that part is solved.  The next question is do you want them about an axis other than the principle axis.  If so, then you will need to use the parallel axis theorem.

Regards
Dave

RE: Calculated Moments of Inertia

Billtati, make sure you use Mechanical Desktop to run a test case for a rigid body that has principle moments that you can easily verify from a textbook.

My question is why does someone want this information.  The moment of inertia calculations are relative to the three axes, x, y, and z, which are different for each part.  I would think that maybe a moment of inertia calculation of the whole machine as an assembly might be helpful or maybe the moment of inertia of the cover about the hinge axis might be interesting.

Please ask whoever is demanding this info for an explanation and post again.

Tom

RE: Calculated Moments of Inertia

I have used MechDesk to calc mass moments of inertia for robot end effectors.  It has been a few years, but I vaguely remember that it was necessary to assign the user coordinate system to the robot wrist joint (my axis of reference).  AND to make the UCS aligned in the proper orientation.  In my case, the wrist joint axis was always offset from the actual part.  It was also necessary to provide the correct mass density value in some obscure text file buried somewhere in the AutoCAD directory (see Help for this).  Only then did MechDesk generate the correct mass moments of inertia of the object about the axes in question.  I tested the procedure on known sample parts to be sure because those numbers always looked weird.

TygerDawg

Red Flag This Post

Please let us know here why this post is inappropriate. Reasons such as off-topic, duplicates, flames, illegal, vulgar, or students posting their homework.

Red Flag Submitted

Thank you for helping keep Eng-Tips Forums free from inappropriate posts.
The Eng-Tips staff will check this out and take appropriate action.

Reply To This Thread

Posting in the Eng-Tips forums is a member-only feature.

Click Here to join Eng-Tips and talk with other members!


Resources