AMS 6504
AMS 6504
(OP)
Hi all,
Does anybody know a link to show me the following standard?
AMS 6504
Does anybody know a link to show me the following standard?
AMS 6504
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: AMS 6504
RE: AMS 6504
RE: AMS 6504
RE: AMS 6504
RE: AMS 6504
Steel, Corrosion Resistant, Sheet, Strip, and Plate 16.5Cr 4.0Ni 4.0Cu 0.30Cb, Solution Heat Treated, Precipitation Hardenable
Abstract: This specification covers a corrosion-resistant steel in the form of sheet, strip, and plate.
These products have been used typically for parts requiring corrosion resistance and high strength up to 600 degrees F (316 degrees C) and where such parts may require welding during fabrication, but usage is not limited to such applications.
Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions.