height adjustment on small assy machine
height adjustment on small assy machine
(OP)
Hello,
I have been given a task to make modify a small assy machine so operator can adjust height as needed. Due to safety concerns Im looking at having someone do this for us.
The machine base is 18" square, it is 60" tall. Weight is 400lbs. Im looking at an adjustment that will allow working height adjustment from 28" to 40"
If anyone has any Ideas on this it is much appreciated.
Thanks
Bob
btw that machine have 480V power coming to it.
I have been given a task to make modify a small assy machine so operator can adjust height as needed. Due to safety concerns Im looking at having someone do this for us.
The machine base is 18" square, it is 60" tall. Weight is 400lbs. Im looking at an adjustment that will allow working height adjustment from 28" to 40"
If anyone has any Ideas on this it is much appreciated.
Thanks
Bob
btw that machine have 480V power coming to it.





RE: height adjustment on small assy machine
There are lots of options for lifting this way. A number of small cylinders, or one or two large units.
400 lbs. is nothing to lift for mass.
RE: height adjustment on small assy machine