Shell99 in Ansys...
Shell99 in Ansys...
(OP)
Greetings,
I am using Shell99 in ANSYS to model a box beam, which has six layers. All these layers are arranged at different angles. So for a particular shell element, I would like to know which the top and bottom layers are.
Any suggestion on this is appreciated,
Many thanks,
Vinay.
I am using Shell99 in ANSYS to model a box beam, which has six layers. All these layers are arranged at different angles. So for a particular shell element, I would like to know which the top and bottom layers are.
Any suggestion on this is appreciated,
Many thanks,
Vinay.





RE: Shell99 in Ansys...
the layer which has a number 1 is the bottom layer and the 6th layer is the top layer.
hope my answer satisfies you
bye corleon