Mil-Spec for Grade-8?
Mil-Spec for Grade-8?
(OP)
Is there a Mil-Spec for Grade 8 hardware?
INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS Come Join Us!Are you an
Engineering professional? Join Eng-Tips Forums!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail. Posting GuidelinesJobs |
|
RE: Mil-Spec for Grade-8?
RE: Mil-Spec for Grade-8?
I agree, most Mil-Specs have gone that way. However, we still use the mil-spec numbers when building "Bills of Materials", finding that manufacturers still recognize them. I was told that none existed for Grade-8, but wanted to get more opinions on this.
RE: Mil-Spec for Grade-8?
https://www.logsa.army.mil/WEB-PAGE/1999/563/26.pdf
TTFN
RE: Mil-Spec for Grade-8?
MIL-DTL-1222 has grade 8 equivalent hex head bolts and nuts in it.
If you want something stronger, look at FF-S-86, which has socket head cap screws.
Both can be found at this link:
http://assist.daps.dla.mil/quicksearch/
just type in 1222 or 86 in the number block and search the results
Andy