INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS
Log In
Come Join Us!
Are you an
Engineering professional?
Join Eng-Tips Forums!
- Talk With Other Members
- Be Notified Of Responses
To Your Posts
- Keyword Search
- One-Click Access To Your
Favorite Forums
- Automated Signatures
On Your Posts
- Best Of All, It's Free!
- Students Click Here
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.
Posting Guidelines
Promoting, selling, recruiting, coursework and thesis posting is forbidden. Students Click Here
|
Home
Advanced SearchYou are in the site-wide keyword search. If you'd like to search a particular forum, navigate to that forum and click on the "Search" button in the gray navigation bar.
|
55 records matched your query of Material Selection for Sulfuric acid. Outputting records 1 to 20.
... guive u some good advice on materials selection for Sulfuric Acid.
http://www.sulphuric-acid.com... ...In concentrated sulfuric acid a protective layer of oxydes develops on the carbon steel surfaces... ...-tips.com/search.cfm?q=Material+Selection+for+Sulfuric+acid&action=search
Dejan IVANOVIC
Process... ...Hi there,
a pump vendor proposing cast iron pump for sulfuric acid. (%98 at 40 deg. C ( 104 F... ... droplets will be dispersed and absorbed by the moving liquid.
Material selection for strong acid... ... is simplified - it is strong acid. Material selection for dilute acid is simplified - it is weak acid... ... of concentrated sulfuric acid, and in all cases carbon steel is the material of choice. The plant I'm at now is a... ...Hacksaw,
Actually CS IS the standard material for sulfuric acid IF 9and only... ... recommendation from a supplier for piping material for 20% sulfuric acid, though the information I pulled from... ...My point of reference is years of experience working in a sulfuric acid plant.
Check Perry's... ... to 10% sulfuric acid at 25 °C.
Also let me know the suitable material of construction for this process... ...I'm looking for a heat exchanger that can handle 78% sulfuric acid at 320oF. I am diluting 98... ... as the acid strength and temperature influencing the selection of material of construction. Chris0164... ... to select material. The most notable example was in 98% sulfuric acid. We installed a pump in all 316 SS... ...I need advice on selecting a material that will not experience corrosion from sulfuric acid. All... ...Your material selections will be few for handling all concentrations of Sulfuric Acid... ...Note that material selection is highly dependant upon the acid concentration - sometimes in counter... ...Does any body can help me in choosing the material of a sulphuric acid service?... ... degree of UT scanning and/or RT work.
For sulfuric acid service, you may want to check out... ... for the Handling and Storage of Commercial Concentrated (90 to 100%) Sulfuric Acid at Ambient Temperatures... ... would appreciate any guidance on material selection for the following applications.
1. Pure sulfuric... ...we are in the process of installing new sulfuric acid piping in our water treatment facility, and I... ...Hi Guys,
Needing your expertise on seal plush plan 11 + 61 to be used on 98wt% Sulfuric Acid... ... (not recommendable) as a quenching media because water or condensate will react with the process fluid (sulfuric acid... ...% sulfuric acid service? This piping is part of a clean-in-place (CIP) process supporting a continuous... ... microfiltration(CMF)unit and was specified/installed by the manufacturer of the CMF unit. The sulfuric acid... ...For %80 sulfuric acid application, temperature is around
at max 43 deg. C , which material do you... ...See if you can find a copy of MTI MS-1 on Concentrated Sulfuric Acid. This a very complete... ... to make weaker sulfuric acid, then carbon steel is not a good selection at all.... ...What are my options for piping a fill line for 96% sulfuric acid?
Thanks... ...We are planning to use Monel 400 for two different sulfuric acid lines of which concentrations... ...Sulfuric acid is pumped from a day tank at normal conditions.
No special heating or cooling... ... is already available at the location
4. Gravity can be used to bring the sulfuric acid to injection point
5... ...
Here are the questions:
a) is it better to dilute sulfuric acid (to about 20%) or use concentrated.
b... ...Hi,<br><br>I have to design some dipping tanks to hold 96% sulfuric acid at 194 degrees F. Any... ...) material it is cheaper than Sandvik SX and has very good corrosion resistance to Acid at this Temp. [sig... ...i need to select material for pump shaft in sulfuric acid at 98% concentration and 120 C. i would... ...First off; review information on pumps suitable for sulfuric acid service
http... ... the material selection has great impact on overall plant cost and return value, as the units are typically used... ... for short periods of time. Hence material selection is of great importance.
Right now it all seems... SEARCH AGAIN
|
Resources
What is rapid injection molding? For engineers working with tight product design timelines, rapid injection molding can be a critical tool for prototyping and testing functional models. Download NowThe world has changed considerably since the 1980s, when CAD first started displacing drafting tables. Download NowPrototyping has always been a critical part of product development. Download NowAs the cloud is increasingly adopted for product development, questions remain as to just how cloud software tools compare to on-premise solutions. Download Now
|
|
