INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS
Log In
Come Join Us!
Are you an
Engineering professional?
Join Eng-Tips Forums!
- Talk With Other Members
- Be Notified Of Responses
To Your Posts
- Keyword Search
- One-Click Access To Your
Favorite Forums
- Automated Signatures
On Your Posts
- Best Of All, It's Free!
- Students Click Here
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.
Posting Guidelines
Promoting, selling, recruiting, coursework and thesis posting is forbidden. Students Click Here
|
Home
Advanced SearchYou are in the site-wide keyword search. If you'd like to search a particular forum, navigate to that forum and click on the "Search" button in the gray navigation bar.
|
106 records matched your query of "ASME VIII" + "PED". Outputting records 1 to 20.
... complies to ASME VIII Div. 1 and to be U Stamped (When sold in America).
2) The vessel complies to PED... ...Hi All,
I am relativity new to designing to code (ASME VIII). I have been tasked to design a... ...ASME VIII and PED are not the same sort of thing - if you are familiar with ASME VIII and read... ... at section 2.2.3(a). You can most likely use ASME VIII design rules to help you towards PED compliance... ...Since the ASME VIII - 1 Code defines it own set of requirements for the execution... ... of the Pressure Equipment Eirective ? Note: In par. UG-84 the ASME VIII - 1 demands minimum toughness values of 20... ... pressure stated in the ASME VIII - 1 in par. UG-99 and the one mentioned in the ESR of the PED. I prefer... ... cases quite higher than those given by ASME.
To make the check one could use the rules of ASME VIII Div... ... have many vessels designed and fabricated in accordance with ASME VIII, and CE marked per the PED... .... As noted above ASME VIII [i]can[/i] be used for design and fabrication for vessels subject to PED... ... doing our best to fit the requirements of ASME VIII at the same time, such that if our product is ever... ... of the ISO-4126 on the way, we have not ordered the ASME VIII or the API 520 yet. For this project since... ... know ASME provides courses aimed at the new PED (2014/68/EU) together ASME VIII pressure vessel design... ... of equipment to Western Europe.
I know about PED, but am far from well versed. In the beginning... ... the had to carry a U-Stamp and comply with the PED, we stuck rigidly with ASME VIII Div.1... ... technique when designing a vessel for Japan using PD5500 or ASME VIII. The high pressure gas law in Japan... ... PED regulation.
DSB123 and ione,
for hydrotes ASME VIII div 1 requires 1.3 Pd with taking... ...DSB123,
My apologies, I assumed the vessels were built more recently under ASME VIII requirements... ... II.
Also gr2vessels, calculation formula for shell thickness is one thing; PED is another; ASME VIII... ... means full vacuum, which will place the vessel under the BPVC jurisdiction (ASME VIII, EN 13445, PD5500... ..., but not under PED requirements, as it was for a Chinese project. I found even with just ASME VIII vessels you... ... in obtaining an ASME VIII vessel from China, but PED compliance may be another story. To avoid headaches you... .../viewthread.cfm?qid=265583
- [link https://www.google.nl/search?q=site%3Aeng-tips.com+ASME+VIII+and+PED&ie=utf-8... ...+and+PED+&oq=ASME+VIII+and+PED+&gs_l=serp.3...173988.173988.0.174273.1.1.0.0.0.0.113.113.0j1.1.0.les%3B... ... Vessel vs. a B5500 or ASME VIII design? Is it cheaper? Is it safer? Can I repair/modify it if I need... ... of the ESR should be met using a design code such as PD5500 (formally BS5500), ASME VIII Div.1 or the new... ... when vessels are designed acc ASME VIII-1.
... ... from certain steel mills. Mterials for PED must be included in an harmonized standard for pressure... ...Guys,
Would you be kind to point me out to the ASME VIII clause which stipulates mandatory U stamp... ... think UG-116(a) is the clause in ASME VIII-1 which stipulates mandatory "U" stamp. But I believe... ... think that I can calculated the whole vessel by ASME VIII Div.1 and perform fagigue analysis acc. to EN... ... they use to accept ASME without problem. Even more in this case where the design according ASME VIII Div 1... ...Much probably you are right, but I think that the future shall be EN 13445 vs. ASME VIII/2 (now... ... in the past some NOT POSITIVE comments on the new issue of ASME VIII-2 (i.e.: too complex to use... ...andy,
The U stamp is related to ASME VIII, the American Code and is not related directly... ... to the PD5500. The current ASME VIII require you to obtain U stamp certification from the ASME Board... .... Is the "Guide for ASME stamp holders-Use of ASME VIII div 1 to meet the EC PED available on line? Thanks Thanks... ... if they have PED services.
Also:
http://ped.eurodyn.com
... ..., fabricated, tested and certified/stamped in accordance with ASME VIII code, as a pressure vessel component... ... of the U-stamp. Please refer to entire ASME-VIII Div. 1. Yes, the components can be provided with partial... SEARCH AGAIN
|
Resources
What is rapid injection molding? For engineers working with tight product design timelines, rapid injection molding can be a critical tool for prototyping and testing functional models. Download NowThe world has changed considerably since the 1980s, when CAD first started displacing drafting tables. Download NowPrototyping has always been a critical part of product development. Download NowAs the cloud is increasingly adopted for product development, questions remain as to just how cloud software tools compare to on-premise solutions. Download Now
|
|
