INTELLIGENT WORK FORUMS
FOR ENGINEERING PROFESSIONALS
Come Join Us!
- Talk With Other Members
- Be Notified Of Responses
To Your Posts
- Keyword Search
- One-Click Access To Your
Favorite Forums
- Automated Signatures
On Your Posts
- Best Of All, It's Free!
*Eng-Tips's functionality depends on members receiving e-mail. By joining you are opting in to receive e-mail.
Partner With Us!
"Best Of Breed" Forums Add Stickiness To Your Site
(Download This Button Today!)
Member Feedback
"...This was the ONLY place that I could find information that I could use to resolve the problem. So thanks once again to member TomSark and the SQL forum!..."
Geography
Where in the world do Eng-Tips members come from?
|
Drafting Standards, GD&T & Tolerance Analysis FAQ
|
Drafting Standards
|
What are some ANSI/ASME standards I should use?
Posted: 12 Oct 04
|
Below is an ongoing list of ANSI/ASME standards that are most common to drafting standards and Geometric Dimensioning and Tolerances (GD&T). It's current at the time of this writing, but if you know of a recent revision change to one of the listed standards, or would like to see additions please contact me and I'll update the list.
ASME Y14.100-2000 Engineering Drawing Practices
ASME Y14.24M-1999 Types and Applications of Engineering Drawings
ASME Y14.34M-1996 Associated Lists
ASME Y14.35M-1997 Revision of Engineering Drawings & Associated Documents
ASME Y14.5M-1994 Dimensioning and Tolerancing
ASME Y14.41-2003 Digital Product Definition Data Practices |
Back to Drafting Standards, GD&T & Tolerance Analysis FAQ Index
Back to Drafting Standards, GD&T & Tolerance Analysis Forum
My FAQ Archive
 Email This FAQ To A Friend |
|
 |
|
